I had a problem with my last one and sent it back and the company I bought if from replaced it with a new one that I received today. When I try to bind the controller to the quad I can tell from the lights that it connects but then I am unable to get the throttle to start up the props. I put it all the way up and then all the way down and it beeps but then nothing happens. Any ideas of what the problem is? Thanks
try unpluging the battery and taking out the batterys from the transmitter, try that a few times ..... if that doesnt work then take off the canopy and make sure all the motors are plugged in
It can be done, but I think you are much more likely to burn the motors out prematurely. I get a nice long flight out of the v262 - as long as you remove the heavy foam, etc. The motors are usually quite hot at the end of a typical 8 or 9 minute flight - so any more may kill them quickly. These motors are really undersized, but the thing works if you be careful and take care of it.
