Hi, Looking for some help getting my new Drone flying... Bought the DJI 450 ARF kit with Naza M Lite and a Radiolink AT9 Transmitter with R9DS Receiver. All was going well, built fine using guides \ you tube - looked good. Naza M cables plugged into Receiver on fist 5 channels - A, E, T, R, U - checked them, they are all secure etc... Switched on Transmitter, powered up Drone (makes noises and LED flashes start-up sequence). Paired Receiver to Transmitter - Red light flashes then goes steady. But no responses from Drone - LED flashes constant Amber - indicating no Transmitter signal ? Any ideas ? Transmitter has full battery and shows TX with 5 bars when both powered on, none when Drone off - so it's seeing the Drone.... Looked everywhere, can't find what I've missed !!
Many thanks - got there in the end....Found out the Driver for the assistant wasn't installing under Windows 10 - had to force it in then the PC communicates with Drove and the transmitter is recognised. All configured now...motors fire up and it lifts....just need to get it to Hoover and fly straight now !
