Okay so ive given up on the oem 3CCD fc that came with the arf floding drone that i bought. Ive since bought a Naze32 Rev6 to replace it. I also have a F3 on the way because ive got another build going on. Just a couple of questions about the Rev6, does it come with a preloaded beta or cleanflight onboard or do i need to flash it? next question, when i plug in the rev6 it has a constant blue light and a somewhat slow flashing green light. the other thing is that the computer doesnt see the fc. Anyone have any ideas? The arf quad is a DYS folding 250 if that makes a difference. It has onboard ESCs built into the arms.
Windows 7 ultimate. Yes the CC3D did connect to the computer, but the transmitter was not seen by LibrePilot.
Okay so next issue I put together a new sp pro f3 acro fc and the same thing with the naze32 I can't get it to connect to the computer to do anything. When i plugged it into the USB it vibrated and made a noise, but the computer doesn't connect.
Also I just put together a SP Pro F3 acro and the same thing happened as with the Naze32 Rev. 6. The Naze32 and the F3 would not connect to the computer. I plugged them into the USB and both buzzed and the computer made noise when connected. The F3 had a contestant blue light and a flashing red light.
Try another USB cable they are not all the same, some will only charge. A sync/data cable is needed. Have you installed this driver? http://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers