hello there im looking for video chat for help with my vtail quad

i have a scratch build vtail quad copter and im trying to learn how to config my flysky t6 fs radio so that i can control my 12k turnigy motors via the hobby king v2.1 control board but no luck , i have a much better chance in plugging in the esc's to the rx direct and then i can use my sticks to control all four motors but when i un plug and re plug using the hk v2.1 no luck at all , im using mode 2 so left stick i can go up and that controls one motor and i can go right and it controls the other motor, while on my right stick setup i have the same controls for the other two remaining motors, i need help guys .....ill post pictures if asked

i actually 3D Printed this quad myself
and all my parts are from HK
remote from HP

 

http://flitetest.com/articles/v-tail-quad-build

http://rc.runryder.com/helicopter/t737477p1/

http://www.helifreak.com/showthread.php?t=545013

http://www.worldvideofans.com/en/video/95463/Flite-Test-V-Tail-Quad-BUILD

Those should get you started in the right direction....

 

Thanks for thole links but i have already came across those links, and the issue here is that not only im new but all those links had a KK2 control board and i dont have that boad mines is the HK 2.1 and its manual does not talk about configs for quadcopter and the same gos for flysky tx manual , i cables that dont know where they go to or if im doing it right ic no results ,,,,i only get results when i hook up esc directly to the rx ,,,,, the issue here is theBOARD hk 2.1 and aside from that setting up the elev alev rudd thrtl

 

this are the only 2pages i have on my controls settings with al theses options and this is the stick config mode im running on so far

 

I just read the manual for the Hk 2.1......sorry that flight controller will not do what you want (it might with a lot of work). Get the KK 2.1 http://www.hobbyking.com/hobbyking/store/__54299__hobbyking_kk2_1_5_multi_rotor_lcd_flight_control_board_with_6050mpu_and_atmel_644pa.html

KK is so much easier to set up it will make the HK look like ......

BTW, V-tail is not the easiest to set up.....but once you dial it in they are great performers